Answers are grounded in this paper and cite their sources.
The present study focuses on adsorption of chromium (trivalent and hexavalent) by using sewage-produced biochar as well as reduction of the produced sewage. Biochar is produced from municipal sewage to examine the capability of two biochars i.e., prepared at 450°C SWB450 and 550°C SWB550 to sorb trivalent chromium [Cr(III)] and hexavalent chromium [Cr(VI)] using batch experiments. Brunauer Emmett Teller (BET) data indicated higher surface area of SWB550 compared to SWB450, which supports the field emission scanning electron microscope (FESEM) results. 4 g L−1 biochar doses emerged as the optimum for Cr(III) and Cr(VI) removal for both biochars at pH 5.0. Performance of SWB550 was 92.9% for Cr(III) and <40% removal for Cr(VI). Energy dispersive X-ray (EDX) spectroscopy and Fourier transformation infrared (FTIR) study confirmed the Cr loading on both the biochars. Adsorption isotherm and kinetic models confirmed that the mechanisms behind the sorption of trivalent and hexavalent Cr on SWB450 and 550 biochar were physical sorption and chemical sorption processes. Adsorption via biochar is a cost-effective and simple process compared to electrodialysis, ion exchange, chemical precipitation, membrane filtration, electrocoagulation, bioremediation, photocatalysis, etc. Present study provides an effective biochar for Cr removal from wastewater as well as reduction in the generated waste through pyrolysis.
No takes yet. Share an insight, caveat, or question.
Gope et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: