Answers are grounded in this paper and cite their sources.
Particle emissions from manual shielded metal arc welding of carbon steel were sampled in a typical industrial maintenance and metal fabrication workplace environment. Particle number measurements over the size range from 14 nm to 10 µm using a scanning mobility particle sizer and an optical particle counter showed that welding produced an approximately lognormal particle mode with a 120 nm count median and a geometric standard deviation of 2.07. This study produced welding particle number concentrations on the order of 2×105/cm3 in the building air 8.5 m away from the welding. Workplace exposure samples were below the current 8-hour American Conference of Governmental Industrial Hygienists mass concentration threshold limit value of 5 mg/m3. Submicron particles comprised 80% of the total aerosol mass collected by a cascade impactor during welding. The concentration of larger particles was indistinguishable from indoor background. Microscopy showed that the welding emissions are dominated by clusters formed from <0.1 µm primary spheres. These data on the particles resulting from aerosol transformation by natural dilution inside an industrial building can be compared with laboratory-scale studies of welding particulate. The particle number characteristics observed in this study are significant because toxicological hypotheses suggest that number or surface area may be a better metric than mass when evaluating the health effects of fine particles.
No takes yet. Share an insight, caveat, or question.
Stephenson et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: