Answers are grounded in this paper and cite their sources.
Samaria-doped ceria, (SmO1.5)0.2(CeO2)0.8 (SDC), containing nickel (Ni) was prepared as the anode of solid oxide fuel cell fueled with 6% ammonia (NH3). The Ni-free SDC powders prepared by the reverse co-precipitation method exhibited poor catalytic activities for NH3 decomposition in 6% NH3/Ar. Impregnation of Ni onto the SDC powders significantly enhanced its catalytic activity. The catalytic activity was highest at 10 wt % Ni–SDC, but it decreased with an increase in the Ni content. Contrary to expectation, the anodic performances were similar between 10 and 40 wt % of Ni loading and the highest maximum power densities were 98.8 and 96.5 mW·cm−2 at 900°C, respectively. Impedance analysis of the anodes revealed that the anodic performance was rate-controlled by the similar process in 4%H2 fuel and that was electrochemical oxidation and diffusion processes.
No takes yet. Share an insight, caveat, or question.
Itagaki et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: