Answers are grounded in this paper and cite their sources.
Herein, the efficacy of the decontamination of aqueous solutions containing malachite green (MG) dye using polypropylene (PP)- chromic acid treated microparticles (PP-CAm) was investigated through the surface treatment reaction (at 60°C for 30 minutes). The generation of sulphonic, carboxylic, and OH groups on the surface of PP-CAm due to the treatment was demonstrated by FTIR analysis. Other features of PP-CAm, including morphology, chemical composition, thermal stability, surface area, surface charge, and acid group concentration, were also investigated using tools such as SEM, EDX, TGA, BET, zeta potential, and titration to give information about the PP-CAm adsorbent nature as well as the adsorption mechanism. The effects of operational parameters, including temperature, pH of the MG solution, contact time, and adsorbent dosage, on the adsorption process were also evaluated. PP-CAm exhibited a maximum adsorption capacity of 63.71 mg g−1 at pH 7, 30°C, and 180 min contact time. The adsorption data fitted best to the Freundlich isotherm and pseudo-second-order kinetic model, with R2 = 0.970. Thermodynamic parameters (ΔH = –20.35 kJ mol−1, ΔS = –1.621 J mol−1 K−1, and ΔG = –19.85 kJ mol−1 at 30 °C) confirmed that the process was feasible, spontaneous, and exothermic. The results suggest a synergistic adsorption mechanism involving both physical and chemical interactions, rather than a purely chemisorptive process, collectively enhancing the affinity of PP – CAm towards the dye. Therefore, with the right treatment, such as chromic acid treatment, PP has the potential to be converted into an efficient adsorbent for removing cationic dyes from wastewater.
No takes yet. Share an insight, caveat, or question.
Salama et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: