This is the authors' abstract. We don't add key points for this paper.
The present study investigates hydrodesulfurization (HDS) of gas oil with 9300 ppm (0.93 wt%) sulfur supplied from Al-Dura Refinery by using an economic catalyst prepared from raw mineral (kaolin clay) cemented by alumina as composite support alumina meta-kaolin (AMK). Characterization of the prepared catalyst was achieved by using Energy Dispersive X-Ray Analysis (EDAX), scanning electron microscopy (SEM), BET surface area, pore volume , Bulk density, X-ray diffraction analysis (XRD) and Fourier-transform infrared spectroscopy (FTIR). AMK was modified as a bifunctional catalyst with active metal (Co and Mo). The hydrodesulfurization (HDS) efficiency was evaluated and compared with the traditional catalyst (CoMo-Al2O3) in a hydrotreating reaction carried out in one stage reactor at temperature 375 oC, pressure 40 bar, LHSV 1hr-1, and H2/HC ratio 200 vol. ratio. 62.2% and 90% of hydrodesulfurization efficiency were achieved for prepared catalyst (CoMo-AMK) and commercial CoMo-Al2O3 respectively at the same operating conditions.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
AlKhafaji et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: