Answers are grounded in this paper and cite their sources.
In this study, batch adsorption experiments were carried out using Moroccan natural pozzolan for the removal of methylene blue (MB) as cationic dye and Congo red (CR) as anionic dye from aqueous solutions. Experimentally, the usual parameters influenced on adsorption process were investigated. The obtained data shows that the adsorption of both dyes follows Langmuir isotherm model and the maximum adsorption capacity for MB and CR is equal respectively to 4.14 and 106.38 mg/g. kinetically, the pseudo-second-order and pseudo-first-order models provide the best correlation to the adsorption data for MB and CR respectively. Furthermore, the thermodynamic parameters of adsorption including free energy variation, enthalpy and entropy were calculated for each dye. Consequently, the adsorption process of both dyes onto natural pozzolan is spontaneous between 25 and 60°C. Furthermore, MB adsorption is exothermic with a decrease in the randomness at MB-pozzolan surface. However, CR adsorption is endothermic and shows strong affinity of CR-pozzolan system. In addition, natural pozzolan was applied for treatment of simulated textile effluents under industrial conditions in terms of salinity, pH and temperature, and demonstrated that natural pozzolan could be recommended for treatment of textile wastewater charged with soluble dyes. Finally, desorption study using HCl as eluent was clearly prove that the pozzolan is regenerative and reusable adsorbent.
No takes yet. Share an insight, caveat, or question.
Derouich et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: