Answers are grounded in this paper and cite their sources.
Gas-assisted liquid atomization facilitates fine droplet generation at reduced injection pressures. In this study, the transient microscopic characteristics of gas-assisted sprays under two injection strategies were investigated. A phase Doppler particle analyzer was employed to measure droplet diameters and velocities, while a time-binning method was used to characterize their transient behavior. Results indicate that, compared to the conventional fuel pilot injection (FPI) strategy, the gas leading injection (GLI) strategy, featuring a pre-established high-speed leading gas flow, results in up to 54% and 84% increases in droplet and gas-phase velocities, respectively. Unlike the continuous droplet deceleration observed in the FPI spray, the leading gas flow in the GLI spray induces early droplet acceleration before subsequent deceleration. Notably, as the gas pre-flow duration increased from 0 to 4 ms, the axial position at which the droplet slip velocity reached equilibrium shifted from 38 to 140 mm. Transient analysis reveals that the FPI strategy tends to discharge massive fuel early, resulting in larger initial Sauter mean diameters (SMDs). In contrast, the pre-established flow in the GLI strategy provides highly stable aerodynamic shear, maintaining the droplet SMD within a narrow fluctuation range. Spatial and temporal uniformity evaluations confirm the significant advantages of the GLI strategy. The shape parameter of the Rosin–Rammler distribution for the GLI spray stabilizes at around 3, compared with a value below 2.3 for the FPI spray, indicating a narrower size distribution for the GLI spray. Shannon entropy was employed to evaluate time-resolved spray uniformity, revealing that the FPI spray uniformity progressively deteriorates with increasing axial distance.
No takes yet. Share an insight, caveat, or question.
Yue et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: