Answers are grounded in this paper and cite their sources.
Stent implantation is a widely accepted treatment for coarctation of the aorta (CoA); however, conventional metallic stents are non-degradable and lack design flexibility, limiting their application in paediatric patients. In this study, a foldable polylactide (PLA) stent fabricated via fused deposition modelling (FDM) is proposed, featuring a geometry-driven design that enables near-zero foreshortening during expansion. The stent architecture is based on a rotation-dominated deformation mechanism, in which the inclined strut elements undergo geometric reconfiguration, resulting in near-zero Poisson's ratio behaviour that is primarily governed by structural parameters rather than material properties. The effects of structural thickness and joint configuration on expansion stability and mechanical performance were systematically investigated. Experimental results show that the optimised thickness of 0.4 mm effectively suppresses structural distortion during balloon expansion. The stent expands from an initial diameter of 4.5 mm to 12 mm with negligible axial shortening and exhibits controlled recoil to 8.7–8.9 mm. Planar compression tests indicate a radial support strength of approximately 0.05 N/mm, which is comparable to other 3D-printed polymer stents and sufficient for temporary vascular support. Preliminary in vitro studies indicate short-term endothelial cytocompatibility, while accelerated degradation tests reveal controlled hydrolytic behaviour with approximately 90% mass retention after 4 weeks. Overall, the proposed design demonstrates a geometry-dominated deformation strategy that enables large expansion with minimal axial deformation, providing a promising framework for the development of deployable biodegradable stents for paediatric applications.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: