Answers are grounded in this paper and cite their sources.
In this study, we designed and electroplated various regular and nanotwinned copper (nt-Cu) lines. These Cu lines were then covered with a polyimide (PI) layer and heat-treated to some extents prior to electromigration (EM) testing. The results show that the EM lifetime of the nt-Cu lines is approximately 4.7 times longer than that of the regular ones. We found that the EM lifetime has been enhanced by 273% using a heat treatment. The improvement is attributed to the heat-treatment-led elimination of the nt–Cu transition layer (nanoscale grain region). The diffusion paths of Cu atoms at the nt-Cu line bottom were shortened as the number of continuous grain boundaries was decreased under the heat-treatment. Thus, the oxidation and void formation were further suppressed. Additionally, we discovered that the columnar microstructure of the nt-Cu lines remained unchanged under a high annealing temperature. These nt-Cu lines with high thermal stability and EM resistance can be widely used for advanced fine-pitch packaging due to its controlled microstructures.
No takes yet. Share an insight, caveat, or question.
Tran et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: