Answers are grounded in this paper and cite their sources.
In this work, the micromechanical properties, crystallographic texture, welding residual stresses and their evolution after plastic strain were investigated in a Ti–6Al–4 V alloy tungsten inert gas weld joint. It was found that the welding process affected the Young modulus and microhardness values in both α and β phases in the different regions of the weld joint. The highest microhardness and Young modulus values of α phase were recorded in the heat-affected zone, whereas the highest values of these characteristics for the β phase were found in the fusion zone (FZ). The change in the micromechanical properties was accompanied by a change in the crystallographic texture components of the dominant α phase from (0001) < 10–10 > and (11–20) < 10–10 > components in the base material to (10–10) < 11–20 > and (11–20) < 3–302 > components in the FZ. The introduction of tensile testing resulted in a continuous stress relaxation and improved the weld joint performances.
No takes yet. Share an insight, caveat, or question.
Mehdi et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: