Synthesis of Carbon-Based Nano Materials for Hydrogen Storage

The aim of this study was to synthesize the carbon-based nanomaterials and determine their hydrogen storage capacities. Carbon nanotubes (CNTs) were first synthesized by chemical vapor deposition (CVD) of acetylene (C2H2) on a magnesium oxide (MgO) powder impregnated with an iron nitrate (Fe(NO3)3·9H2O) solution. The synthesis parameters were selected as the synthesis temperatures of 500 and 800°C, the iron content in the precursor of 5% and the synthesis time of 30 minutes. The synthesized material was purified by using HCl at 75°C for 15 hours. After synthesis of CNTs, the polyaniline-doped H3BO3 and BF3 and composites were prepared by coagulation method. The synthesized CNTs and composites were characterized by transmission electron microscopy, FT-IR spectroscopy, Raman spectroscopy and thermogravimetric analyzer. The BET specific surface areas were obtained from the nitrogen adsorption isotherms at -196°C. The hydrogen storage capacities of these carbonaceous materials were measured using volumetric method. It was found that the hydrogen adsorption capacities were changed in the range between 0.44 and 3.67wt% at the liquid nitrogen temperature and gas pressure up to 100 bar.