Answers are grounded in this paper and cite their sources.
The structure of interfacial dislocations (IDs) formed at different depth and expansion of single Shockley-type stacking faults (1SSF) from the IDs in forward-current degradation of 4H-SiC p-i-n diodes were investigated. IDs showing different contrast in X-ray topography (XRT) were formed during p-i-n diode fabrication processes. From a high-resolution observation using a transmission electron microscopy, it was clarified that IDs observed by different contrast in XRT were different in the formation interface although they had the same Burgers vector of 1 / 3 [ 11 2 ¯ 0 ] and Si-core type. The ID with brighter contrast in XRT were formed at the shallower interface between p + anode and n − drift layers, whereas darker contrast ones were formed at the deeper interface between n − drift and n + buffer layers. Expansion of the 1SSFs originated from the IDs which were formed at the shallower interface occurred under the condition of lower stress-current density than 25 A cm −2 , whereas that originated from ID which were formed at the deeper interface was caused under the condition of higher stress-current density than 1200 A cm −2 . These results indicated that IDs were formed at different depths during device processes, and 1SSF expanded from these IDs under various stress-current conditions.
No takes yet. Share an insight, caveat, or question.
Hayashi et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: