Answers are grounded in this paper and cite their sources.
Trace amount Ca‐doped TiO2 films were synthesized by the hydrothermal method and applied as photoanodes of dye‐sensitized solar cells (DSSCs). To prepare Ca‐doped TiO2 film electrodes, several milliliters of Ca(NO3)2 solution was added in TiO2 solution during the hydrolysis process. The improvements of DSSCs were confirmed by photocurrent density‐voltage (J-V) characteristics, electrochemical impedance spectroscopy (EIS) measurements. Owing to the doping effect of Ca, the Ca‐doped TiO2 thin film shows power conversion efficiency of 7.45% for 50 ppm Ca‐doped TiO2 electrode, which is higher than that of the undoped TiO2 film (6.78%) and the short‐circuit photocurrent density (Jsc) increases from 13.68 to 15.42 mA·cm−2. The energy conversion efficiency and short‐circuit current density (Jsc) of DSSCs were increased due to the faster electron transport in the Ca‐doped TiO2 film. When Ca was incorporated into TiO2 films, the electrons transport faster and the charge collection efficiency ηcc is higher than that in the undoped TiO2 films.
No takes yet. Share an insight, caveat, or question.
Pan et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: