NMR study of the stabilities of urea–formaldehyde resin components toward hydrolytic treatments

The solid residues of nine urea–formaldehyde (UF) resins after hydrolytic treatment at pH4 and 86°C for 20 h and the solid residues of one UF resin after eight different hydrolytic treatments were examined by 13 C‐CP–MAS NMR. The relative stability toward hydrolysis of each structural component in each UF resin was established for various hydrolytic conditions. In general, UF resins prepared from starting mixtures with a formal F/U molar ratio of 1.00 show a high degree of stability toward hydrolysis. Cross‐linking methylene linkages in the UF resins show a higher susceptibility to hydrolytic treatments at pH 4 and 86°C than do linear methylene linkages. UF resins prepared with an F/U molar ratio of 2.00 are susceptible to hydrolysis at pH 4 and 86°C. Dimethylene ether linkages, methylols attached to tertiary amides, and poly(oxymethylene glycol) moieties are probably the main formaldehyde emitters in UF resin products.