Answers are grounded in this paper and cite their sources.
This research had as objective the development of particulate composite materials in epoxy matrix reinforced with Corymbia citriodora sawdust. The evaluated properties were bending modulus of elasticity (MOE) and bendingstrength (MOR). The resin volumetric fraction over wood sawdust was the only variable factor at experimental design, consisting 45% and 65% in fractions. The thickness of specimens for the bending test was 4mm, defined at preliminary studies. Were fabricated two panels by investigated fractions, with 200×200mm dimensions, under a press pressure of 3 MPa, and made at ambient temperature, in different times. From these panels, were extracted the specimens test with dimensions and specifications established by American Standard ASTM D790: 2010. From results obtained from analysis of variance, concluded that variation of sawdust fraction present a significant behavior at response-variables, presenting the best results the materials manufactured with 45% of epoxy resin.
No takes yet. Share an insight, caveat, or question.
Santos et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: