Answers are grounded in this paper and cite their sources.
This study investigated the optical properties of PbO-GeO 2 -Ga 2 O 3 glasses doped with Er 3+ and Yb 3+ rare earth ions, deposited with gold nanoparticles and annealed at different times (1 h, 12 h, 28 h, and 52 h). By varying the annealing times, we can understand how these thermal processes influence the position of the energy bands, which in turn affects the material’s optical properties such as the energy gap and Urbach energy. The study found that the sample annealed for 52 h had the lowest E g value and the highest E u value, indicating significant structural changes due to prolonged thermal treatment. The study aimed to determine the energy gap ( E g ) and Urbach energy ( E U ), Judd-Ofelt parameters (Ω 2 , Ω 4 , Ω 6 ), oscillator strength ( f exp and f cal ), and root mean square (RMS) deviation. Additionally, the study reports on the linear absorption and heat transfer results, which were used to evaluate temperature changes during Z -scan experiments. The data obtained indicate that the sample subjected to 52-hour annealing has the smallest E g value, suggesting that intense thermal processes and crystallisation affect the positions of the material’s energy bands, increasing its ability to absorb light. Consequently, the E U value for this sample is the highest at 0.312 eV, decreasing to 0.203 eV for the sample annealed for 1 h. This indicates that longer annealing times result in more significant structural changes in the glass matrix, thereby modifying its optical properties. The analysis of the obtained results, leads to the conclusion that the lowest values of both experimental ( f exp ) and calculated ( f cal ) oscillator strength occur at 546 nm and 811 nm, indicating the potential energy properties of the 4 S 3∕2 and 4 I 9∕2 levels in the atomic structure. It was observed that the J-O parameters did not exhibit significant changes with increased annealing time, suggesting that short-term thermal processes may be sufficient to achieve a stable energy configuration. This finding is of significant practical importance, as it indicates that the material can maintain its optical properties even with shorter annealing times, thereby enhancing the efficiency of the production process.
No takes yet. Share an insight, caveat, or question.
Fuks et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: