Answers are grounded in this paper and cite their sources.
In this paper, an irradiation-hardened p-GaN HEMT based on the AlN polarization effect (A-HEMT) was proposed. Firstly, before irradiation, the AlN polarization effect assists the gate in regulating the channel, enhances the charge sharing in the GaN layer, and suppresses the DIBL effect. Secondly, after passivating the gate etched surface with the AlN strain layer, the electron trap density at the AlGaN/GaN interface decreased from 7.69×1018/(eV·cm2) to 8.66×1017/(eV·cm2). The hole trap density at the p-GaN/AlGaN interface decreased from 3.0×1018/(eV·cm2) to 5.21×1017/(eV·cm2), and the trap energy level became shallow from 0.289 eV to 0.281 eV. As a result of the mitigated gate trap effect, after 300 krad (Si) and 500 krad(Si) on-state irradiation, the gate Schottky barrier and the ideality factor of A-HEMT were less degraded. Further, the post-irradiation carrier transport model of the A-HEMT gate stack was proposed. Thirdly, the optimized electric field modulated by AlN polarization in the device drift region can effectively shield the charge generated by the on-state irradiation. After 500 krad(Si) dose, the A-HEMT has a smallerVthdrift and a smallerRdsonvariation. The channel electric field in the A-HEMT was about 1.6 times lower than that of the conventional HEMT (C-HEMT). The measured capacitance showed that the AlN strain layer can reduce the traps induced by on-state irradiation in the active region of the device. Therefore, the AlN strain layer is a feasible irradiation hardening method.
No takes yet. Share an insight, caveat, or question.
Qiu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: