Answers are grounded in this paper and cite their sources.
Rock mass stability in underground excavations is strongly influenced by the geometry of pre-existing fractures. This study investigates the mechanical response and fracture evolution of granite specimens containing two unequal-length prefabricated fractures with different secondary fracture dip angles (SFAs) under uniaxial compression. Digital image correlation (DIC) and acoustic emission (AE) monitoring were used to characterize the coupled evolution of surface deformation and internal damage. The results show that all specimens exhibit a typical four-stage stress–strain response. The peak compressive strength varies non-monotonically with SFA, increasing by 35.59% from 30° to 60°, decreasing by 34.55% from 60° to 120°, recovering by 32.73% at 135°, and subsequently decreasing by 25.70% at 150° DIC results indicate that strain localization initiates mainly at the fracture tips and within the rock bridge, while the dominant failure mode changes from predominantly tensile cracking to mixed tensile–shear cracking depending on fracture geometry. AE activity exhibits a three-stage evolution pattern, and both the onset of rapid AE activity and the b-value evolution show clear angle dependence. These findings highlight the critical role of secondary-fracture orientation in crack interaction, damage evolution, and macroscopic failure, providing useful insights into the stability assessment of jointed rock masses.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: