Answers are grounded in this paper and cite their sources.
We have determined the write power density dependence on heating pulse width and antiferromagnet (AF) thickness using magnetic tunnel junctions whose storage layer is exchange biased with IrMn or FeMn. An increase in write power density needed to write the storage layer has been observed for both AF as pulse width is decreased from 0.1 ms to 10 ns. Quasistatic blocking temperatures (Tb) were measured on both full sheet and patterned samples, showing a reduction in Tb for patterned samples which we link to process induced damages. Power-temperature relationship was established based on a correspondence between writing power for long pulse duration and quasistatic Tb measurement. Both write power density and associated temperature results show a dependence of the Tb on AF thickness at pulse width as short as 10 ns. Particularly for IrMn, the relationship between write power and pulse width becomes weakly dependent on the AF thickness above a certain AF thickness. The write power density is significantly lower for thinner AF layer. This suggests a critical thickness below which the AF writing process deviates from bulk behavior.
No takes yet. Share an insight, caveat, or question.
Lombard et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: