Answers are grounded in this paper and cite their sources.
In this study, during an ausforming treatment, the specimens were austenitized at 1100°C and then exposed to rolling process at temperature of 300°C by different degrees of deformation; 5, 10 and 15%, and finally were undergone an austempering operation at the same temperature for different times. The results of microstructural analyses showed that the increased deformation degree facilitated the bainite transformation so that a soaking time of about 24 hours was required to complete the transformation when 15% reduction was used. The results of mechanical tests were also revealed an increase of about three times in tensile strength from 663 MPa in as-received sample to 1803 MPa in the sample ausformed with 15% deformation. Higher deformation degree also caused a simultaneous improvement in strength and ductility likely affected by reduction in none stable blocky austenite and formation of finer nano bainite structure composed of ferrite lath and film-shaped austenite in nanometric scale. The study of fracture morphology also showed that the reduced blocky austenite could be a reason for considerable disappearance of intergranular fracture.
No takes yet. Share an insight, caveat, or question.
Roohollah Rahmanifard (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: