Answers are grounded in this paper and cite their sources.
In this study, the microstructure and defects of an Al‐Mn‐Mg‐Zr alloy produced by the Powder Bed Fusion–Laser Beam (PBF‐LB) technology are investigated. The influence of the process parameters on the microstructure and defects is demonstrated. Aluminum alloys are usually prone to cracking during solidification. However, finding the optimal parameters of the PBF‐LB process yielded three‐dimensional specimens of Al‐Mn‐Mg‐Zr alloy with densities reaching 99.6% of the theoretical value, free from cracks. It is shown that manganese not only precipitates as a brittle Al 6 Mn intermetallic compound after solidification but also forms a supersaturated solid solution of manganese in aluminum. The influence of the process parameters on the surface roughness of the manufactured samples and their microhardness was evaluated. It is also shown that the cooling rate of the melt pool has an effect on the microstructure of the samples obtained at the optimal process parameters.
No takes yet. Share an insight, caveat, or question.
Grigoriev et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: