Answers are grounded in this paper and cite their sources.
Asphalt concrete mixture usually suffer permanent deformation under load repetitions and hot climate condition.Research work is going on globally to implement additives in the binder production process or through the preparation of asphalt concrete mixture.In the present investigation, an attempt has been made for the inclusion of three types of additives namely (crumb rubber powder, fumed silica, and Phosphogypsum) into the asphalt cement binder using two types of penetration grade asphalt cement (40-50) and (60-70).Asphalt concrete mixtures were prepared, Marshall specimens have been constructed and tested under repeated indirect tensile stresses with the aid of Pneumatic Repeated Load System PRLS.The influence of such additives on the permanent deformation at 40 °C environment was monitored through continuous video capture.It was concluded that the temperature susceptibility of the binder in terms of PI increases after digestion with fumed silica and Phosphogypsum while it decreases after the addition of crumb rubber.The rate of deformation decreases by (25 and 30) % by implication of rubber and Phosphogypsum additives respectively for (40-50) grade binder.However, the rate of deformation declines by (15, 3 and 21) % for (60-70) binder by implication of rubber, fumed silica, and Phosphogypsum additives respectively.
No takes yet. Share an insight, caveat, or question.
Saad Issa Sarsam (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: