Experimental study demonstrates enhanced corrosion resistance in AZ91D magnesium alloy via yttrium-based coatings, indicating a viable method for durable lightweight alloys.
The yttrium-based rare earth conversion coating on the surface of AZ91D magnesium alloy was prepared and post-treated by simple immersing in solution of yttrium nitrate (Y(NO3)3) and silica sol. The micro-morphology, transverse section and composition of the coatings were investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS), respectively. The corrosion resistance was assessed by means of potentiodynamic polarization curves, immersion testing and electrochemical impedance spectroscopy (EIS). The results show that the coating is mainly composed of Y2O3, YOx/y, Al2O3 and MgO, and the post-treated yttrium-based rare earth conversion coating was homogeneous and uniform in morphology. The corrosion resistance capability of the coated AZ91D magnesium alloy was obviously improved compared with the bare one. The corrosion potential shifted positively about 230 mV, and the corrosion current density decreased about two orders of magnitude.
No takes yet. Share an insight, caveat, or question.
Han et al. (2016) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: