Answers are grounded in this paper and cite their sources.
The recent research and developments of a-Si:H based solar cells have greatly promoted its position as low cost solar cell. Unfortunately, a-Si:H solar cells suffer appreciable light induced degradation for thickness greater than 200nm. It has been reported that boron doped hydrogenated amorphous silicon oxide (p-a-SiOx:H) films have a low temperature coefficient compared to those based on hydrogenated amorphous silicon (p-a-Si:H) . Moreover, the solar cells with a p-a-SiOx: H generate more electricity than the solar cells with p-a-Si: H window layer due to the wider band gap (Eg) of these films. We present in this paper a computer simulation on the effects of window layer thickness on the performances of single junction amorphous silicon oxide solar cells. We varied the thickness of the window layer from 5 nm to 25 nm and our simulation results showed that cells parameters are significantly affected window layer thickness. However, the film thickness of the p-a-SiOx:H window layer increased from 5 nm to 25 nm, the power conversion efficiency (PCE) of the solar cells respectively decreased in the ranges of 5.733% to 5.271% .the simulation data are in good agreement with the literature
No takes yet. Share an insight, caveat, or question.
Kouider et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: