Answers are grounded in this paper and cite their sources.
Computational study demonstrates improved damage prediction in 3D-printed continuous carbon-fiber nylon laminates, indicating conventional composite testing protocols remain valid for additive parts.
This study develops and experimentally validates a computationally efficient finite element model for predicting the mechanical response of 3D-printed continuous carbon-fibre-reinforced nylon laminates under tensile and shear-dominated loading conditions. The printed composite is represented within an equivalent single-layer formulation using homogenised theoretical plies. The constitutive formulation accounts explicitly for nonlinear transverse tensile and in-plane shear behaviour. Damage initiation is evaluated using the Hashin criterion. Depending on the identified failure mechanism, selective degradation of the relevant stiffness components is applied. For matrix-dominated failure modes, the formulation further distinguishes between transverse-tension- and shear-dominated failure and employs an additional strain-threshold criterion to govern degradation activation. Linear elastic, nonlinear constitutive and damage-related material parameters were identified from tensile tests on [0°] 4 , [90°] 4 and balanced [45°/-45°] s laminates. The parameter governing mixed transverse-tension/shear matrix failure was calibrated using the [45°] 4 configuration. The model was validated without further parameter adjustment using [0°/90°] s , [15°/-75°] s and [30°/-60°] s tensile and V-notched Iosipescu specimens. The consistency of the in-plane shear modulus identified from the balanced [45°/-45°] s laminate was verified using the [45°] 4 and V-notched Iosipescu configurations. Mechanical extensometers, strain gauges and digital image correlation provided the global stress-strain responses and local strain fields used for model identification and validation, confirming that characterisation procedures commonly employed for conventional composite laminates remain applicable to the investigated 3D-printed material. Compared with the built-in Abaqus Hashin damage model incorporating the experimentally observed nonlinear transverse-tension and in-plane shear constitutive relations, the proposed formulation provided more accurate predictions of the mechanical response of the investigated laminates.
No takes yet. Share an insight, caveat, or question.
Rucka et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: