Answers are grounded in this paper and cite their sources.
On-die testing can accelerate development of semiconductor devices, but poses certain challenges related to high frequency and high current switching. This paper describes design and development of a tester for double-pulse switching test and measurement of dynamic on-state resistance of unpackaged High-Electron-Mobility Transistors (GaN HEMTs). The tester is capable of switching an inductive load at drain-to-source voltage up to 400 V and drain current up to 10 A. Design challenges resulting from specific properties of GaN HEMTs and on-die measurement are explained, and solutions are proposed. Essential parts of the developed device are described, including low inductance gate-driver and measurement methods. Modified drain voltage clamping circuit for accurate on-state drain voltage measurement is described. The tester is constructed as a printed circuit board, integrated into a probe station. Voltage and current waveforms are measured with oscilloscope and used to calculate the on-resistance. Results of a reference measurement with commercially available packaged transistors are presented. Waveforms measured on experimental unpackaged normally-off GaN HEMT samples are also presented and discussed. The proposed tester device proved to be capable of performing the dynamic on-resistance measurement with satisfactory results.
No takes yet. Share an insight, caveat, or question.
Kozárik et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: