Answers are grounded in this paper and cite their sources.
Thermal oxidation was employed as a method to enhance the wear resistance of two novel TiZrAlV alloys. The obtained oxidized coatings, primarily composed of TiO 2 , ZrO 2 , Al 2 O 3 , and Ti 2 ZrO 6 , showed compositional variations influenced by Ti/Zr ratio. Oxidation kinetics revealed distinct kinetic behaviors: the T30Z alloy followed a linear model, whereas the T47Z alloy exhibited parabolic model. Furthermore, the specific wear rate of the T30Z alloy initially decreased from 32.18×10 −4 to 22.21×10 −4 mm 3 /(N·m) during short durations, but increased after 24 h due to coating performance degradation. In contrast, the T47Z alloy showed a consistent improvement in wear resistance under all conditions, achieving a minimum specific wear rate of 20.87×10 −4 mm 3 /(N·m). Regarding wear mechanisms, the T30Z alloy exhibited both abrasive and adhesive wear, except after 1 h of oxidation. In comparison, the oxidized coating on the T47Z alloy effectively suppressed adhesive wear, throughout the durations, except 36 h of oxidation.
No takes yet. Share an insight, caveat, or question.
Zhong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: