Answers are grounded in this paper and cite their sources.
This contribution describes the determination of the internal ballistic properties of tubular into the use of homobimetallic iron compound derived from p-phenylene ([{Cp*Fe}2-p-Ph’]) as a burning rate modifier in solid heterogeneous rocket propellant. The solid heterogeneous rocket propellants based on hydroxyl-terminated polybutadiene (HTPB) and ammonium perchlorate (AP) with 0.3%wt Fe2O3 (named Propellant 1) and 0.3%wt [{Cp*Fe}2-p-Ph’] (named Propellant 2) content in the propellant composition were prepared and investigated. The ballistic parameters of the examined propellants were determined by combustion in a laboratory rocket motor. The ballistic properties were evaluated in the pressure range 7–30 MPa. It was found that the linear burning rate was increased for propellants 1 and 2 in comparison to propellant without the modifier. Determinations of the tensile and decomposition temperature of the propellants 1 and 2 were also investigated. Comparatively lower n-value was observed for composition containing propellant 2 than for propellant 1 and HTPB-based propellant without the modifier.
No takes yet. Share an insight, caveat, or question.
Norambuena et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: