Answers are grounded in this paper and cite their sources.
This study investigated the role of the geometrical parameters of a wedge block on its stability using physical and numerical modeling. For the purpose of physical modeling, a new experimental setup was developed, and the stability of rock slopes was modeled. Sensitivity analysis was performed on four geometrical parameters: tilt angle of the wedge ( β ), included angle of the wedge ( ξ ), the apparent dip of the slope in the sliding direction ( Ψ fi ), and the difference in dip direction of the slope face and discontinuities intersection line (Δ α ). A total number of 89 rock slope models were tested, and the wedge factor ( K ) was calculated for each model. Subsequently, 3D numerical models, corresponding to each physical model were conducted. Rock slope face inclination was applied by defining gravity vectors in different directions, which led to the development of models with a much simpler geometry. Ultimately, numerical modeling results almost align with the outcomes of physical modeling. Good agreement was observed between physical and numerical models and the existing analysis. According to the results, the behavior of the wedge-shaped block and its safety factor depends on the geometric conditions of the wedge and its slope, regardless of the rock material properties, as models were tested with two different materials. Additionally, sensitivity analysis demonstrates that by increasing Δ α , the slope safety factor was increased, as expected. Finally, practical graphs were developed by which the safety factor against the wedge failure can be estimated using the geometrical parameters of the wedge and the rock slope. • A new wedge failure modeling setup was designed and constructed. • The safety factor of a cohesionless wedge, regardless of the material properties, depends on its geometry. • Difference between slope face dip direction and discontinuities intersection line (Δα) was investigated as a new parameter • Practical graphs were developed for estimation of the slope safety factor using friction angle and geometry of the wedge.
No takes yet. Share an insight, caveat, or question.
Mahdizadeh et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: