Answers are grounded in this paper and cite their sources.
This study focuses on doping TiO 2 with trace amounts of Ag⁺ ions, employing spray pyrolysis to prepare the Ag-doped TiO 2 photoelectrode for application in Dye-Sensitized Solar Cells (DSSCs). In this regard, Ag-doped TiO 2 nanomaterials were initially synthesized from Titanium(IV) isopropoxide (TTIP) with varying concentrations of Silver nitrate (AgNO 3 ). The structural and optical characterizations of the synthesized nanomaterials confirmed the presence of TiO 2 in pure anatase phase and enhanced light absorption, respectively. The morphological characterization of Ag-doped TiO 2 nanomaterials revealed spherical shaped particles. Subsequently, the DSSCs were fabricated using Ruthenium-based N719 dye and imidazolium iodide/ triiodide redox couple as the sensitizer and electrolyte, respectively. Photovoltaic performances were evaluated under simulated solar irradiation (100 mW cm −2 , 1 sun, AM 1.5). The optimized device with 3 mmol% Ag-doped TiO 2 photoelectrode exhibited PCE (η) of 8.32%, which was about 13% greater than the device with un-doped TiO 2 (η = 7.35%). The observed upsurge in PCE is due to the 10% increase in short-circuit current density ( J SC ) value resulting from enhancement in visible light absorption which was confirmed by UV-Visible spectroscopic analysis. Moreover, an improved electron transport in the Ag-doped TiO 2 based device was confirmed by electrochemical impedance spectroscopic study which is ascribed to the significant reduction in charge recombination. These findings demonstrate the potential of Ag-doped TiO 2 for enhanced DSSC performance, offering a viable pathway for improving solar energy conversion efficiency.
No takes yet. Share an insight, caveat, or question.
Sritharan et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: