Answers are grounded in this paper and cite their sources.
Recent developments of ICP deep etching have allowed for the realization of bulk titanium high-aspect-ratio structures with high mechanical endurance, excellent corrosion resistance and bio-compatibility, which are very attractive for in vivo and/or harsh environment applications. In this paper, bulk titanium deep reactive ion etching (DRIE) has been carried out and evaluated at wafer level. A new mask material SU8 is introduced instead of an oxide hard mask, which has suffered from limited depth and laborious masking protocols. In order to optimize the process design, the influence of process parameters (coil power, platen power and Cl 2 flow rate) on the etch rate, surface roughness, etch profile and wafer uniformity was investigated. By varying these parameters, an optimized recipe is obtained; an etching rate of 1 µm min −1 has been achieved with a vertical sidewall profile and smooth floor. High-aspect-ratio comb finger structures and beams were fabricated on the titanium substrate, which can potentially be used to realize many novel titanium-based microelectromechanical systems (MEMS) devices. Ultra-deep grooves up to 200 µm have been fabricated with this technology, which is among the best of the present reports.
No takes yet. Share an insight, caveat, or question.
Zhao et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: