Answers are grounded in this paper and cite their sources.
Ti-6Al-4V-Si 3 N 4 composites were effectively fabricated by spark plasma sintering (SPS) technique. The addition of Si 3 N 4 on Ti-6Al-4V was varied from 5% to 15% (wt fraction). The effect of Si 3 N 4 addition on the densification, microstructure, and microhardness and corrosion behaviour of Ti-6Al-4V was investigated. An increase in microhardness value was recorded from 325.46 HV 0.1 to 585.73 HV 0.1 . X-ray diffraction (XRD) analysis showed that the intensity of diffraction peaks of Si 3 N 4 phase in the composites increased. The sintered Ti-6Al-4V reinforced with Si 3 N 4 compacts revealed the non-existence of intermediate phases, such as TiSi 2 (titanium silicide) which was expected. SEM analysis of the spark plasma sintered composites revealed α and β phase microstructures in Ti-6Al-4V with uniform distribution of Si 3 N 4 particulates in the matrix. The corrosion resistance property of the material was improved by the addition of Si 3 N 4 from 0.986629 mm/year to 0.030547 mm/year.
No takes yet. Share an insight, caveat, or question.
Kgoete et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: