Answers are grounded in this paper and cite their sources.
This study focuses on developing models to predict and optimize the volumetric mix design properties of Pulverized Palm Fiber Reinforced Asphalt Concrete (PPFRAC) using Response Surface Methodology (RSM). The primary parameters under consideration are the voids in mineral aggregate (VMA), voids in the total mixture (VTM), and voids filled with bitumen (VFB). A central composite design was used to formulate the experimental setup, and RSM coefficients were estimated using the least squares algorithm. The models were validated using T-tests and R² statistics, and optimization was performed through MATLAB. The results show that VMA values range from 16.428% to 18.785%, VTM varies from 3.058% to 5.268%, and VFB ranges from 71.956% to 84.129%. These variations align with the Marshall mix design standards for medium-traffic pavements, which recommend VMA values between 14% and 20%, VTM between 3% and 5%, and VFB between 65% and 80%, demonstrating a balanced binder and aggregate mix. The developed RSMs for VMA, VTM, and VFB demonstrated high predictive accuracy with R² values of 80.18%, 78.82%, and 77.72%, respectively. Optimization using MATLAB’s fmincon solver yielded the optimal proportions of sand (33.347%), stone dust (3.479%), bitumen (5.779%), and PPF (0.125%), resulting in a VMA of 17.12%, VTM of 3.47%, and VFB of 81.12%, all of which meet or exceed the Marshall mix design standards. These findings emphasize the effectiveness of RSM in optimizing the volumetric properties of fiber-reinforced asphalt, ensuring a well-balanced mixture that offers durability, strength, and flexibility, making it suitable for medium-traffic conditions.
No takes yet. Share an insight, caveat, or question.
Ohwerhi et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: