Answers are grounded in this paper and cite their sources.
Plain shotcrete is widely used in tunnel support, but its inherent brittle characteristics limit its long-term performance under complex loading. Incorporating polypropylene fiber (PPF) is an effective toughening approach. Five groups of concrete specimens with different PPF contents (0%, 0.05%, 0.1%, 0.15%, 0.2%) were prepared through laboratory mixing. Quasi-static Brazilian splitting tests and SHPB dynamic splitting tests were systematically conducted. Full-field strain on the specimen surface was monitored via digital image correlation (DIC), and the microstructure was characterized by scanning electron microscopy (SEM). A mesoscale numerical model containing randomly distributed aggregates and fibers was established based on LS-DYNA, and the entire splitting failure process was simulated and validated. The results show that the effect of PPF content on splitting tensile strength first increases and then decreases, with the optimal content identified as 0.1%, achieving a 40.5% increase in static strength over the reference group. The reinforcing effect of PPF under dynamic loading is more pronounced. Taking the PPF-b group as an example, the dynamic tensile strength increased by 41.8%, 43.2%, 44.0%, 45.3%, and 44.5% over the reference group under five impact velocities, respectively. The dynamic strength of specimens with all fiber contents continuously increases with increasing impact velocity.Fiber bridging changes the failure mode. Under static loading, crack propagation transitions from straight through-going to curved extension, with an increase in crack number but a decrease in crack width. Under dynamic loading, the initiation of the main crack in the PPF-b group occurs earlier, while the stable propagation stage is delayed. DIC confirms that strain localization is effectively dispersed. SEM analysis indicates that the C-S-H gel layer on the fiber surface forms chemical anchoring that enhances interfacial bonding, and the interfacial friction during fiber pull-out continuously dissipates energy. The synergistic effect of these two mechanisms effectively delays the coalescence of microcracks. The mesoscale numerical simulation reproduces the splitting failure process. The distribution of fiber axial force shows that fibers are more fully activated under dynamic loading, with a more pronounced pull-out effect. The failure volume ratio of specimens is significantly reduced after fiber incorporation, which verifies the suppressing effect of fibers on damage localization. This study provides experimental and theoretical basis for the application of polypropylene fiber-reinforced shotcrete in underground engineering such as tunnel support.
No takes yet. Share an insight, caveat, or question.
Zhu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: