Answers are grounded in this paper and cite their sources.
To investigate the unsteady flow behavior and optimization strategies for slurry transport in full-tailings cemented backfill systems, a comprehensive study integrating experimental tests, CFD simulations, and theoretical analysis was conducted. Experimental results on particle size distribution, chemical composition, and rheological properties confirmed that the tailings slurry exhibits typical Bingham fluid characteristics, with its flowability highly sensitive to solids concentration. Based on this, steady-state and transient CFD models were developed to analyze two representative unsteady phenomena—pipeline slack flow and water hammer—while corresponding full-pipe flow criteria and pressure wave propagation models were proposed. Engineering optimization analysis for the investigated backfill system indicated that under a flow rate of 150 m³/h and a concentration of 68%, the pipeline system could not maintain continuous full-pipe flow, whereas increasing the concentration to 70% improved the tendency toward full-pipe transport under the examined operating conditions. Further analysis under representative operating conditions revealed the significant influence of slurry concentration, pipe diameter, and horizontal pipeline layout on transport stability. Accordingly, an optimization strategy is proposed that prioritizes concentration adjustment, with pipe diameter reduction in non-main lines and strategic pipe routing used as supplementary measures to improve full-pipe transport stability.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: