Answers are grounded in this paper and cite their sources.
Laser micromachining with ultrashort laser pulses is a promising approach for the generation of small geometries in the micro-meter scale, such as microchannels for passive fluid transport. The ablation of small structures with high average laser power still poses a challenge when high surface quality is required. In this work, beam splitting with a diffractive optical element (DOE) was used to divide the laser beam of a high-power ultrafast laser into an array of 1x15 spots on the workpiece. Fast scanning of up to 20 m/s perpendicular to the orientation of the array using a Galvanometer-scanner allowed for simultaneous micromachining of multiple microchannels with high surface quality on cemented tungsten carbide. The high average laser power of 160 W in combination with the adapted processing strategy enabled the simultaneous and productive fabrication of 15 microchannels with a low surface roughness of S a < 1.5 µm along the channel wall.
No takes yet. Share an insight, caveat, or question.
Cirakoglu et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: