Answers are grounded in this paper and cite their sources.
Accurate thermophysical properties of working gases are essential for refractive index gas thermometry (RIGT). Based on the previously established analytical model for the temperature deviations δ induced by multi-component gas impurities, this study proposes a rapid calculation approach to efficiently evaluate the influence of impurities on the results of RIGT. This approach is applied to analyze actual gas samples from two gas bottles, No. 1151147 for 4 He and No. 14532388 for Ne. Suitable temperature and pressure ranges are identified for RIGT systems using 4 He (temperature from 2 K to 300 K and pressure from 1.5 kPa to 120 kPa) and Ne (temperature from 30 K to 300 K and pressure from 100 kPa to 250 kPa), with sub-ranges further divided to investigate the influence of individual impurities on δ . The maximum δ values for 4 He and Ne both occur at the temperature point where water vapor starts to be included in the gas impurity analysis, reaching 22.9 ppm and 141.2 ppm, respectively. Furthermore, the results obtained from the rapid calculation approach show good agreement with those from our previously proposed analytical model (Cryogenics 152 (2025) 104238). This work demonstrates that the rapid calculation approach can effectively analyze the influence of impurities on temperature measurement under real working conditions. Therefore, it provides a theoretical basis for quantifying impurity-related uncertainties and offers a practical guidance for the optimization of gas handling systems in RIGT.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: