Answers are grounded in this paper and cite their sources.
A transparent and protective multilayer coating composed of poly(allylamine hydrochloride) (PAH), poly(styrene sulfonic acid) sodium salt (PSS), and nano-TiO2 films was fabricated on wood surfaces by layer-by-layer assembly method. The coating was formed through pre-immobilization of cationic PAH layer on wood substrate, followed by alternate soaking cycles in pH-controlled anionic PSS solution and TiO2 colloidal solution. The structure and properties of the assembled coating were characterized through scanning electron microscopy (SEM), energy disperse X-ray analysis (EDXA), UV reflection and absorption, colorimetry, and contact angle (CA) measurement. Results revealed that the coverage uniformity and thickness were improved with increasing number of PSS/TiO2 bilayers. The coating masked the cell wall ultrastructure while leaving the microscale features intact. The anatase TiO2 in the assembled coating enhanced the UV stability of wood and resulted in a lowered photochromism. Furthermore, the photocatalytic capability of the nano-TiO2 films in degrading dyes of rhodamine B and methylene blue was verified. The nano-TiO2 film on the top surface of the coating embodied a superhydrophilicity, showing self-cleaning and anti-fog capabilities. Stearic acid modification altered the superhydrophilicity to hydrophobicity with CA of 140°.
No takes yet. Share an insight, caveat, or question.
Rao et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: