Answers are grounded in this paper and cite their sources.
This work presents an experimental investigation of the bending behavior and dynamic characteristics of SS316L – IN625 functionally graded (FGM) beam specimens fabricated by powder-blown laser-directed energy deposition (L-DED), with numerical analysis performed to validate the experimental results. The beam specimens, composed of stainless steel (SS316L) and Inconel (IN625), were produced with multiple compositionally varying layers to approximate a smooth gradient through the thickness. The compositional transition was confirmed using energy-dispersive X-ray spectroscopy (EDS). Experimental three-point bending and modal tests were conducted to measure the central displacement and natural frequencies of the fabricated specimens. A corresponding layered numerical analysis was performed using a MATLAB implementation based on an established higher-order formulation and the rule of mixtures with power-law distribution, which has been validated in previous studies. Excellent correlation between numerical predictions and experimental results was achieved, thereby confirming the validity of the experimental results. Based on experimentally supported responses, the fabricated SS316L – IN625 beam specimens are shown to exhibit systematic stiffness-mass redistribution associated with the graded architecture, which governs their flexural response and natural frequencies.
No takes yet. Share an insight, caveat, or question.
Lim et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: