Answers are grounded in this paper and cite their sources.
Lightweight gears enable the weight reduction of frequently used mechanical engineering parts, but require an in-depth understanding of their mechanical load capacity. Therefore, the dynamic load behavior of a holistic bionic lightweight gear with a weight reduction of 61 % compared to a conventional solid gear is investigated. An in-process measuring system consisting of strain gauges and a telemetry system for recording the strain condition during dynamic tooth meshing is used. Based on finite element simulation data, four gear positions with biaxial strain fields on the gear surface were identified to position and align the strain gauges with high sensitivity. As a result, the sensors are capable of resolving the local material load during the gear revolutions over time, since the experimental results agree with theoretical considerations. For instance, regions of single-tooth contact and double-tooth contact are detectable during meshing, as well as the load due the meshing of a neighboring tooth. Furthermore, the observed gear deformations for the different transmission torques are proven to be elastic, and a biaxial strain measurement is demonstrated and verified by the simulation data. Thus, the in-process deformation behavior of a holistic bionic gear can be monitored over time, opening up structural health monitoring applications in future. • First load analysis of a holistic bionic lightweight gear under dynamic conditions. • Detectability of strain dynamics during gear meshing by means of strain sensors. • Resolution of the local biaxial strain state. • Validation of the dynamic load capacity by proving elastic deformations.
No takes yet. Share an insight, caveat, or question.
Thomaneck et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: