Answers are grounded in this paper and cite their sources.
In this work, the effect of post-deposition annealing in selenium environment was studied on Cu 2 SnSe 3 thin film solar cells prepared from solid solution by doctor blade method. XRD pattern confirms deposited films are of polycrystalline nature having cubic phases with (1 1 1) orientation. The crystallinity improves with the increase in annealing temperature. At high annealing temperature surface agglomeration was found which is due to the melting and re-evaporation of the components from the surface. Electrical properties like carrier mobility, conductivity also modified with the increase in annealing temperature. Maximum efficiency of 1.17% was achieved for the sample annealed at 400 °C having barrier height ( ϕ b ), ideality factor (n) and series resistance (R s ) nearly equal to 0.71 eV, 1.5 and 69 Ω respectively.
No takes yet. Share an insight, caveat, or question.
Basak et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: