Answers are grounded in this paper and cite their sources.
Tungsten is crucial for extreme-environment applications; however, its fabrication by additive manufacturing is challenging due to its high melting temperature, ductile-to-brittle transition temperature, oxygen sensitivity, steep thermal gradients, and strong susceptibility to cracking. In this work, a spot-melting strategy is introduced using electron beam powder bed fusion (E-PBF) to enable repeatable fabrication of highly dense tungsten with crack-free microstructures in the sectioned specimens. The approach integrates a Defocused-Focused-Defocused (DFD) spot sequence with island-based segmentation and stochastic spot jumping to minimize steep thermal gradients and mitigate solidification cracking, under high pre-heating temperatures (~1200 °C) and vacuum conditions. Using this strategy, two builds of nine cuboids each, 18 in total, were fabricated with consistently ultra-high density (~99.9304 ± 0.0152% on average), with representative specimens exhibiting crack-free microstructures, demonstrating exceptional process stability and reproducibility. Microstructural characterization reveals coarse columnar grains aligned with the build direction, a strong θ -fiber texture 001 // Z, and a dense network of low-angle subgrain boundaries, indicative of early-stage dynamic recrystallization. Direct observation of the microstructure on the as-solidified top surfaces without conventional metallographic preparation also revealed a strong 001 // Z texture, while cross-sectional characterization confirmed its persistence throughout the build thickness, indicating that surface measurements can be representative of the bulk material. Mechanical testing demonstrates that E-PBF spot-melted tungsten achieves a room-temperature ultimate compressive strength of ~1.75 GPa with substantial inelastic strain, comparable to wrought tungsten and exceeding laser powder bed fusion counterparts. At elevated temperatures (800 – 1400 °C), compressive flow stresses remain below the deformation-processed wrought-rod baseline while exhibiting continued strain hardening up to ε inel ≈ 0.3 . These results establish spot melting in E-PBF as a reproducible pathway for fabricating brittle refractory metals.
No takes yet. Share an insight, caveat, or question.
Truong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: