Answers are grounded in this paper and cite their sources.
This study was conducted in an open-circuit subsonic wind tunnel at the Aeronautics Hangar of Bandung State Polytechnic with the aim of obtaining the airflow velocity distribution in the test section and determining the blade pitch angle configuration that produces the greatest velocity. The wind tunnel has a total length of about 6 m with an octagonal test section measuring 40 cm x 40 cm x 155 cm and 7 cm chamfers at each corner. The research method involved numerical simulation using ANSYS and 3D modeling with Solidworks. Simulations were conducted at 500 RPM with blade pitch angles of 40°, 50°, 60°, and 70°. The results showed the highest speed at 50° blade pitch angle (16 - 18 m/s), with the lowest speed at 70° blade pitch angle (9 - 13 m/s). Tests at a blade pitch angle of 50° with variations in fan rotational speed (300 RPM, 500 RPM, and 700 RPM) also showed similar speeds (16.2 m/s at 500 RPM). It was found that the 50° blade pitch angle produced significant vortex strength which was influenced by the high airflow velocity. During the test, to improve the accuracy of airflow velocity measurement, it is necessary to ensure that all parts of the wind tunnel are closed.
No takes yet. Share an insight, caveat, or question.
Pandiangan et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: