Answers are grounded in this paper and cite their sources.
Tribological testing is essential for evaluating the performance and reliability of advanced ceramic multilayer-coated tools. Unlike conventional materials, coated inserts are designed to enhance hardness, thermal stability, and resistance to wear and friction. Owing to these properties, accurate specific wear rate determination becomes challenging, primarily due to the very small depth of the resulting wear tracks. In this study, a new wear evaluation method based on Material Ratio Curve Integration (MCI) is proposed. Reciprocating ball-on-flat tribological tests were performed on cemented tungsten carbide (WC–Co) samples coated with multilayer ceramic films produced using both physical and chemical vapor-based deposition techniques. Wear behavior was analyzed using high-resolution optical profilometry, and wear volumes were quantified using three approaches: the Averaging Cross-Section (ACS) method, following the procedure outlined in ASTM G133-05; Direct Volume Calculation (DVC), based on the integration of cross-sectional profiles along the wear track length; and the newly proposed MCI method. The accuracy, limitations, and reliability of each method were systematically evaluated. The MCI method was validated for sufficiently large wear track depths, showing very good agreement with results obtained using the DVC method implemented using dedicated functions in SensoMAP®. The main advantages of MCI-method are its applicability when other methods fail (e.g., very shallow wear tracks) and the reduced operator dependence.
No takes yet. Share an insight, caveat, or question.
Codau et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: