This is the authors' abstract. We don't add key points for this paper.
In this research, the microstructural and mechanical aspects of a CoCrFeNiMo 0.5 high-entropy alloy coating (HEAC) deposited via high-velocity oxygen-fuel (HVOF) spraying are analysed. The investigation explores the cross-sectional and plan-view properties of the coating, which consists of unmelted splats (USs), semi-molten splats (SMSs), fully-molten splats (FMSs), oxides, and pores. Within the USs, Ni-Co-Fe-rich face-centred cubic (FCC) dendrites containing deformation twins are identified, accompanied by Mo-rich σ interdendrites. In SMSs, heavily deformed impact regions lead to ultra-fine elongated grains, while dynamic recrystallization (DRX) promotes (ultra-)fine equiaxed grains in their interior sections, both adopting a FCC structure. FMSs, on the other hand, exhibit fine columnar FCC grains with a completely uniform elemental distribution. Beyond the extremely hard σ phase, strengthening mechanisms, such as lattice distortion, grain refinement, and twinning-related strengthening, contribute to the mechanical strength of the coating. Notably, oxide dispersion strengthening occurs predominantly through spinels formed during the HVOF spraying process, playing a crucial role in improving the coating’s strength further. In contrast, the presence of small amounts of pores has a detrimental effect on mechanical properties, though this effect remains localized. • CoCrFeNiMo 0.5 HVOF-HEAC exhibits remarkable mechanical properties. • Spinel-type in-flight oxides yield oxide dispersion strengthening. • Deformation twins in FCC dendrites and σ interdendrites contribute to hardness.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Eriş et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: