Answers are grounded in this paper and cite their sources.
Friction stir spot welding (FSSW) effectively solves many problematic welding metals, such as dissimilar metals and thin alloy sheets. Carbon steel‐AISI 1006 top sheet and an aluminum alloy AA2024‐T3 bottom sheet were joined by FSSW with a cylindrical pinless tool. Joints are evaluated in terms of temperature, mechanical characteristics, microstructure, and macrostructure. With the other variables of the welding operation being constant, the influence of spindle speed, dwell duration, and penetration depth on the force of tensile shear failure has been studied throughout the welding process. The welding parameters were 10 and 15‐s preheating time, 0.2, 0.4, and 0.6 mm plunging depth. Rotational speed was 710, 900, 1400, and 1800 rpm. A shear tensile test was utilized to examine the bonded specimens. At the optimal conditions, a microstructural analysis was conducted. Both interfacial and pullout fractures were found in the AA2024‐T3 and carbon steel sheets. Intermetallic compounds (IMCs) located at the weld interface were evaluated.
No takes yet. Share an insight, caveat, or question.
Mejbel et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: