Answers are grounded in this paper and cite their sources.
A composite membrane based on a non-stoichiometric composition of BPO4 with excess of PO4 (BPOx) was synthesised and characterised for medium temperature fuel cell use (120–180 °C). The electrolyte was characterised by FTIR, SS-NMR, TGA and XRD and showed that the B–O is tetrahedral, in agreement with reports in the literature that boron phosphorus oxide compounds at B:P < 1 are exclusively built of borate and phosphate tetrahedra. Platinum micro electrodes were used to study the electrolyte compatibility and stability towards oxygen reduction at 150 °C and to obtain kinetic and mass transport parameters. The conductivities of the pure BPOx membrane electrolyte and a Polybenzimidazole (PBI)-4BPOx composite membrane were 7.9 × 10−2 S cm−1 and 4.5 × 10−2 S cm−1 respectively at 150 °C, 5%RH. Fuel cell tests showed a significant enhancement in performance of BPOx over that of typical 5.6H3PO4-PBI membrane electrolyte. The enhancement is due to the improved ionic conductivity (3×), a higher exchange current density of the oxygen reduction (30×) and a lower membrane gas permeability (10×). Fuel cell current densities at 0.6 V were 706 and 425 mA cm−2 for BPOx and 5.6H3PO4-PBI, respectively, at 150 °C with O2 (atm).
No takes yet. Share an insight, caveat, or question.
Mamlouk et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: