Answers are grounded in this paper and cite their sources.
Electric field optimization is a critical technique to ensure the compact structure and reliable operation for AC gas insulated power apparatus. To obtain a more uniform electric field distribution, this paper proposes the concept of the d-SFGM insulator, i.e., applying the surface functionally graded material (SFGM) with a designed thickness (d) distribution of high permittivity along the insulator surface. The magnetron sputtering technique was used to fabricate the d-uniform insulator and the d-SFGM insulator by depositing BaTiO3layers. The theoretical analysis indicates that the electric field distribution is optimized using the d-SFGM insulator, followed by the d-uniform insulator. The finite element simulations were employed to investigate the electric field distributions and dielectric losses of different insulators. The results show that for the case of the d-uniform insulator, a higher permittivity or larger thickness of the sputtering layer results in a more uniform electric field distribution. With the application of the d-SFGM insulator, the maximum electric field strength and dielectric loss are both significantly reduced compared to the d-uniform insulator. Finally, experimental tests were conducted to further verify the feasibility of SFGM. The AC flashover voltage of the d-SFGM insulator is much higher than those of the conventional insulator and the d-uniform insulators. Therefore, the d-SFGM insulator has great potential for improving the reliability of the AC gas insulated power apparatus.
No takes yet. Share an insight, caveat, or question.
Du et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: