Answers are grounded in this paper and cite their sources.
This study investigates the effects of particle size (0.420-1.1410 mm), dosage (40, 80 g/L), influent concentration (total 10 meq/L, 400 mg/L), contact time (5-180, 270, 360 min), set-temperature (20-32 o C), and heat pre-treatment (200, 400, 600 o C) of natural zeolite on the removal efficiency of heavy metallic ions (HMIs); lead (Pb 2+ ), copper (Cu 2+ ), iron (Fe 3+ ), nickel (Ni 2+ ), and zinc (Zn 2+ ).The sorption process is performed in batch mode with a 100 mL aqueous solution, acidified to a pH level of 2 with concentrated nitric (HNO3) acid.For all experimental parameter conditions examined, the removal efficiency order follows: Pb 2+ >>Fe 3+ >Cu 2+ >Zn 2+ >Ni 2+ ; the zeolite mineral exhibits the greatest preference towards the Pb 2+ ion in all parameter trends.Overall, the removal efficiency is increased with decreasing particle size, as well as increasing dosage, contact time, and set-temperature.The operation is influenced by the studied parameters in the order of: influent concentration > heat pre-treatment level > dosage > particle size > contact time > set-temperature.
No takes yet. Share an insight, caveat, or question.
Ciosek et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: