This is the authors' abstract. We don't add key points for this paper.
Tissue engineering has become one of the great applications of three-dimensional cell printing because of the possibility of fabricating complex cell-laden scaffolds. Three typical methods (inkjet, micro-extrusion, and laser-assisted bio-printing) have been used to fabricate structures. Of these, micro-extrusion is a comparatively easy method, but has some drawbacks such as low in situ cell viability after fabricating cell-laden structures because of the high wall shear stress in micro-sized nozzles. To overcome this shortcoming, we suggest an innovative cell printing method, which is assisted by a piezoelectric transducer (PZT). The PZT assistance in the dispensing process enhances the printing efficiency and cell viability by decreasing the wall shear stress within a nozzle because the PZT effect can lower the shear viscosity of the bioink via micro-scale vibration. In this study, 5 wt% cell-laden alginate was used as a bioink, and various PZT conditions (frequencies up to ∼400 Hz and amplitudes up to ∼40.5 μm) were simultaneously applied to the cell-printing process to examine the effectiveness of the PZT. The PZT-assisted cell-printing method was found to be highly effective in direct cell printing and could achieve cell-laden structures with high in situ cell viability.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Koo et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: